Key Advantages

-3-Ton Rated Lifting Capacity
The specified 3T (3,000kg) rated lifting capacity provides a lifting option for compatible vehicles and automotive maintenance tasks. The load applied to the jack must remain within its rated capacity.

-Dual-Pump Hydraulic System
The dual-pump mechanism is designed to advance the lifting arm more quickly during the initial lifting stage, helping reduce the number of handle strokes required to reach the vehicle's lifting point. Actual lifting speed depends on load and operating conditions.

-Low-Profile Design for Reduced Ground Clearance
The low-position floor jack design is intended to provide easier access beneath vehicles with relatively low ground clearance. Suitability must be confirmed by checking the jack's actual minimum saddle height against the vehicle's clearance and designated lifting point.

-Floor Jack Configuration for Practical Positioning
The horizontal floor jack layout allows the lifting saddle to be positioned and aligned with the manufacturer's designated lifting point, making it practical for garage and workshop servicing on a firm, level surface.

-Supports Different Automotive Maintenance Tasks
Suitable for assisting with tyre replacement, wheel inspection, brake servicing preparation and general vehicle maintenance. The jack is intended for lifting only; appropriately rated jack stands must support the vehicle before any work is performed underneath it.

Broad Range of Applications
-Low-Clearance Vehicle Servicing, Compatible Passenger Car Maintenance, Tyre Replacement, Wheel Inspection, Brake Service Preparation, Automotive Repair Workshops, Garage Maintenance, Vehicle Inspection, Car Servicing, Vehicle Lifting Assistance


核心优点

-3吨额定顶升能力
产品标示额定顶升能力为3T（3,000KG），适用于符合承重要求的车辆及汽车维修顶升工作。实际作用于千斤顶的负载不得超过额定承重能力。

-双泵液压系统提升顶升效率
采用双泵液压设计，在初始顶升阶段可帮助顶升臂较快上升，减少达到车辆顶升点所需的手柄操作次数。实际顶升速度会受到负载及使用条件影响。

-低位设计适合离地间隙较小的车辆
采用低位卧式结构，方便将顶升托盘伸入离地间隙相对较小的车辆底部。使用前必须确认千斤顶实际最低托盘高度、车辆离地间隙及指定顶升点是否匹配。

-卧式结构方便对准车辆顶升点
卧式千斤顶设计方便在车辆周围调整位置，并将顶升托盘对准汽车制造商指定的顶升点，适合在坚固、平整地面上的车房维修及车辆保养工作。

-辅助多种汽车维修与保养工作
可用于符合条件的车辆顶升，辅助轮胎更换、车轮检查、刹车维修准备及车辆日常保养等工作。千斤顶只负责顶升，进行车底维修前必须使用额定承重足够的专用支撑架。

适用范围广阔
-低离地间隙车辆保养、适合的乘用车维修、轮胎更换、车轮检查、刹车维修准备、汽车维修车间、车房保养、车辆检查、汽车日常维护、车辆辅助顶升