Key Advantages

-PH2 Tip Provides a Defined Match for Compatible Phillips Screws
The stated PH2 profile provides a specific matching option for compatible Phillips screw heads, making it easy to identify the required screwdriver profile according to the fastener.

-150MM Length Provides Extended Working Reach
The stated 150MM length provides additional working reach compared with shorter configurations, making it practical for suitable screw positions where a longer screwdriver is preferred.

-Go-Through Configuration Provides a Distinct Tool Structure
The stated go-through design distinguishes this model from a conventional Phillips screwdriver, providing another tool configuration for suitable workshop, repair and maintenance tasks.

-Dedicated Phillips Profile Supports Direct Manual Fastener Work
The Phillips profile is intended for compatible cross-head fasteners, allowing suitable screws to be tightened, loosened and adjusted manually during assembly, installation and maintenance work.

-PH2×150MM Configuration Expands Screwdriver Length Selection
The defined PH2×150MM specification provides a longer PH2 screwdriver option that can complement shorter sizes, allowing users to select different lengths according to the screw position and project requirements.

Broad Range of Applications
-Phillips Screw Tightening, Phillips Screw Loosening, Screw Adjustment, Assembly Work, Installation Work, Repair Work, Equipment Maintenance, Workshop Tasks, Longer-Reach Screwdriving, General Maintenance


核心优点

-PH2十字刀头提供明确螺丝匹配规格
标示PH2十字刀头，为相符的十字槽螺丝提供特定匹配选择，可根据紧固件头型及实际工作需求选择对应螺丝起子。

-150MM长度提供更长操作距离
标示150MM长度相比更短规格提供更长的工作距离，适合需要较长螺丝起子配置的相符螺丝位置，为不同安装及维修工作增加长度选择。

-穿心结构提供不同工具配置
产品标示为GO-THROUGH穿心结构，与一般十字螺丝起子形成不同的工具配置，可作为车间、维修及维护工作中的另一种工具选择。

-专用十字刀头支持直接手动紧固件操作
PHILLIPS十字刀头针对相符的十字槽紧固件，可直接用于锁紧、拆卸及调整相符螺丝，适合装配、安装及维护过程中的十字螺丝操作。

-PH2×150MM配置扩展螺丝起子长度选择
明确的PH2×150MM规格提供较长的PH2十字螺丝起子选择，可与其他较短长度规格搭配，根据不同螺丝位置及施工需求选择合适工具。

适用范围广阔
-十字螺丝锁紧、十字螺丝拆卸、螺丝调整、装配工作、安装工作、维修工作、设备维护、车间作业、较长距离螺丝操作、一般维护